Needle Scaler Remove Pneumatic Derusting Slag Rust Remover Tool Paint Corrosion

PROSHI compact air needle scaler description: The 12 hardened steel needles on this needle scaler work at a speed of 4000 BPM to remove stubborn rust, dirt, paint, and welding waste easily. PROSHI compact air needle scaler technical specifications: Working trip: 6-7mm. Blows per minute: 4000bpm. Needle diameter: 3mm. Number of Needles: 12. Air consumption: 4CFM. Air inlet connector: 1/4 ''. Weight: 1.1kg. What's in the Box: PROSHI compact air needle scaler 1 pcs. American standard 1/4 NPT quick connector 1 pcs. More views for compact air needle scaler Compact air needle scaler size The length is 320mm (12.6 inches), the diameter of the handle is 33mm (1.29 inches), and the net weight is 1.1kg (2.4lb). Compact air needle scaler air inlet The tail air inlet is equipped with a filter screen to prevent solid objects from entering the body, causing damage to the compact air need scale or affecting its service life. A compact air needle scaler is a pneumatic tool commonly used for surface preparation tasks such as removing rust, old paint, and other coatings from metal surfaces. Here’s a brief introduction to its use: 1. **Safety First**: Before using the needle scaler, ensure you wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask or respirator if working with materials that produce harmful dust. 2. **Tool Setup**: Connect the scaler to an air compressor with a suitable air hose. Ensure the compressor is set to the correct pressure as specified by the manufacturer, usually around 90 PSI. The needles will begin to move rapidly back and forth. - **Application**: Place the needles against the surface you wish to clean. Move the tool evenly across the surface, allowing the needles to chip away the unwanted material. Avoid pressing too hard; let the tool do the work to prevent damage to the surface. Using a compact air needle scaler effectively requires a steady hand and attention to detail to ensure the best results without damaging the underlying material. 12 hardened 3mm steel needles remove weld slag, rust, paint, and dirt. working trip: 6-7mm, blows per minute: 4000bpm Needle scaler easy adjustment without special tools. What's more, it features an exhaust design that keeps the human body away from dust, and stainless steel filter to prevent the matter from entering the interior space.