1 Pair Strut Coil Spring Compressor Removal Installer Tool 300mm For MacPherson 6941689839847

This Compressor easily compresses most Macstrut springs and allows for repair on strut tubes, bent struts and other damaged pieces Threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools Constructed with forged hooks and center hardened for maximum strength and longevityEasy to Use 1. Lubricate both main shafts with oil. 2. Align the hooks with the safety pins backed off so the hooks will fit over the spring 3. Position both set of hooks 180° a part, opposite each other 4. Push safety pins in the lock position on hooks 5. Using a 3/4or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge Special tips: The color of blow case may be varied, you may receive item with black or red carry case, it won't affect item function. DO NOT USE IMPACT DRIVER! Size The total lenght if this spring compressor tool is 300mm, width is 65mm. Material Constructed with forged hooks and center hardened for maximum strength and longevity Compress coil springs to repair or replace MacPherson struts, shock absorbers and spring sets Built-in detent safety pins and broad spring contact securely locks into place for protection Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools